Streamline Your
PCB Development Process
Solutions for
Advanced IC Packaging
Solutions for PCBA / EMS
Solutions for Efficient
Plastic Welding
Next Generation Thin-film
Scribing

Precision Manufacturing Solutions

Partnering with tech innovators

As a leading provider of laser manufacturing solutions, LPKF Laser & Electronics helps to create more powerful electronic systems and increase functionality and efficiency for a broad range of applications and industries.
Investor Relations

All key figures & information for shareholders.

Jobs & Careers

Discover our wide range of career opportunities and become part of the LPKF team.

Services & Support

LPKF offers worldwide premium customer support.

Indispensable: Use of Lasers for Depaneling

Due to the continuing trend towards miniaturization and ever greater packing densities in the PCB sector, precision laser technology has become the standard technology for depaneling in recent years.

At SMT in Nuremberg, LPKF Laser & Electronics will be demonstrating why many companies now rely exclusively on laser systems such as LPKF MicroLine - and thus save resources and improve yields.

Compared to the beginnings of laser technology in depaneling, modern laser systems nowadays operate at a very high speed. Especially the new LPKF MicroLine 2127 system with the most powerful laser source in the series reduces the pure cutting time by up to 50% and thus also supports very high cycle times of SMT lines.

There are many other aspects in favour of laser technology for PCB manufacturers. Especially for high-quality printed circuit boards with high quality requirements, many OEMs now prescribe laser technology for depaneling. Because where mechanical systems reach their limits - i.e. with high packing densities, the finest conductor paths even in the edge areas and flexible materials - the laser demonstrates its technological inherent advantages and thus ensures the highest quality, efficient use of materials and minimal handling time.

The laser operates contact-free, without wear. It does not generate any heat or mechanical stress except at the desired location. Since the forces affecting the material are thus reduced to a minimum with laser technology, the good part rate rises to almost 100%.

 

The systems of the MicroLine series ensure clean, burr-free cuts in FR4, FR5, CEM materials, ceramics, polyimides, RF materials and other printed circuit board substrates. MicroLine systems integrate seamlessly into existing Manufacturing Execution Systems (MES) through suitable interfaces and enable tracking & tracing for production runs. Reliable traceability is a particularly important point for safety-relevant applications.
 

News & Press

Indispensable: Use of Lasers for Depaneling

Due to the continuing trend towards miniaturization and ever greater packing densities in the PCB sector, precision laser technology has become the standard technology for depaneling in recent years.

At SMT in Nuremberg, LPKF Laser & Electronics will be demonstrating why many companies now rely exclusively on laser systems such as LPKF MicroLine - and thus save resources and improve yields.

Compared to the beginnings of laser technology in depaneling, modern laser systems nowadays operate at a very high speed. Especially the new LPKF MicroLine 2127 system with the most powerful laser source in the series reduces the pure cutting time by up to 50% and thus also supports very high cycle times of SMT lines.

There are many other aspects in favour of laser technology for PCB manufacturers. Especially for high-quality printed circuit boards with high quality requirements, many OEMs now prescribe laser technology for depaneling. Because where mechanical systems reach their limits - i.e. with high packing densities, the finest conductor paths even in the edge areas and flexible materials - the laser demonstrates its technological inherent advantages and thus ensures the highest quality, efficient use of materials and minimal handling time.

The laser operates contact-free, without wear. It does not generate any heat or mechanical stress except at the desired location. Since the forces affecting the material are thus reduced to a minimum with laser technology, the good part rate rises to almost 100%.

 

The systems of the MicroLine series ensure clean, burr-free cuts in FR4, FR5, CEM materials, ceramics, polyimides, RF materials and other printed circuit board substrates. MicroLine systems integrate seamlessly into existing Manufacturing Execution Systems (MES) through suitable interfaces and enable tracking & tracing for production runs. Reliable traceability is a particularly important point for safety-relevant applications.
 

Indispensable: Use of Lasers for Depaneling

Due to the continuing trend towards miniaturization and ever greater packing densities in the PCB sector, precision laser technology has become the standard technology for depaneling in recent years.

At SMT in Nuremberg, LPKF Laser & Electronics will be demonstrating why many companies now rely exclusively on laser systems such as LPKF MicroLine - and thus save resources and improve yields.

Compared to the beginnings of laser technology in depaneling, modern laser systems nowadays operate at a very high speed. Especially the new LPKF MicroLine 2127 system with the most powerful laser source in the series reduces the pure cutting time by up to 50% and thus also supports very high cycle times of SMT lines.

There are many other aspects in favour of laser technology for PCB manufacturers. Especially for high-quality printed circuit boards with high quality requirements, many OEMs now prescribe laser technology for depaneling. Because where mechanical systems reach their limits - i.e. with high packing densities, the finest conductor paths even in the edge areas and flexible materials - the laser demonstrates its technological inherent advantages and thus ensures the highest quality, efficient use of materials and minimal handling time.

The laser operates contact-free, without wear. It does not generate any heat or mechanical stress except at the desired location. Since the forces affecting the material are thus reduced to a minimum with laser technology, the good part rate rises to almost 100%.

 

The systems of the MicroLine series ensure clean, burr-free cuts in FR4, FR5, CEM materials, ceramics, polyimides, RF materials and other printed circuit board substrates. MicroLine systems integrate seamlessly into existing Manufacturing Execution Systems (MES) through suitable interfaces and enable tracking & tracing for production runs. Reliable traceability is a particularly important point for safety-relevant applications.
 

Productfinder
Productfinder