LPKF ProtoMat E44

Milling printed circuit boards in the electronics Lab

  • LPKF quality at an entry-level rate
  • With powerful CAM software
  • Single and double sided printed circuit boards
  • Ideal for research and training
LPKF ProtoMat E44

Safe, Precise and Affordable

Milling printed circuit boards in education and in the electronics laboratory

The LPKF ProtoMat E44 is the cost-effective entry into the world of professional PCB prototyping. The system scores with its particularly simple operation.

Information

Small and strong

The main field of application for theProtomat E44 is milling structures in copper-coated circuit board material, drilling through holes or milling individual circuit boards from larger panels. This ProtoMat already shows their advantages with smaller quantities or in occasional use: It offers similar precision as the high-speed ProtoMat S-series systems, but is limited to the essentials. The LPKF ProtoMat E44 has a spindle with 40000 rpm. For manual tool change, the system features a collet chuck with precise height adjustment by micrometer screw.

Software included

The supplied LPKF CircuitPro CAM software facilitates the solution of production requirements. It offers extensive access to all process parameters. A comprehensive parameter library for many common materials supports the operator in his own projects.

 

 

Register system and camera

In addition to increased positioning accuracy on double-sided PCBs, the camera's measurement function helps the ProtoMat E44 to set the routing channels more easily. After the measuring process, the machine software guides the user to the optimal setting. Register systems are indispensable for processing double-sided PCBs: they hold the processed PCBs securely in one position, even after turning them over for structuring the second side. With the E44, a camera helps with positioning: It recognizes fiducials or geometric structures and aligns the structuring to them. With a resolution of less than 1 μm, a repeatability of ±5 μm and a precision in the fitting hole system of ±20 μm, the small circuit board plotter more than meets the requirements for single or double-sided circuit boards.

 

 

Videos

Comparison table

Application E44 S64 S104  
Milling/drilling of single- and double-sided circuit boards  
Milling/drilling of HF and microwave substrates -  
Milling/drilling of multilayers with up to eight layers  
Contour milling of circuit boards  
Laser structuring of ultrafine conductor areas - - -  
Milling of flexible and flex-rigid circuit boards - -  
Engraving of front panels/plates  
Milling of cutouts in front panels -  
Milling of SMD solder paste stencils -  
Laser cutting of SMD solder paste stencils - - -  
Structuring of ceramic materials - - -  
Machining of housings -  
Milling of solder frames -  
Depaneling and postprocessing of circuit boards -  
Drilling of test adapters -  
Inspection Templates -  
Dispensing -  

LPKF circuit board plotters at a glance

Specialist for RF and microwave applications, fully equipped for the electronics laboratory.

Allrounder for Rapid PCB Prototyping. The basic system for almost all in-house PCB prototyping applications.

The cost-effective entry into the world of professional in-house PCB prototyping.

 Downloads

Brochure
LPKF ProtoMat E44 (pdf - 178 KB)
Download
Product Catalog
Rapid PCB Prototyping Product Catalog (pdf - 3 MB)
Download
TechGuide
LPKF TechGuide Rapid PCB Prototyping (pdf - 3 MB)
Download

 Contact us

I agree to the processing of my data pursuant to the Privacy Statement.

* Required fields
Productfinder
Productfinder