Universal Cutter

For engraving insulations of 0.2 - 0.5 mm

Micro Cutter

For engraving insulations of 0.1 - 0.15 mm (high-speed motor required)

HF-Cutter

For outlines of HF structures (small penetration depth into the substrate, straight side walls, high-speed motor required); Diameter: 0.15 mm, 0.25 mm, 0.4 mm

End Mill

For engraving aluminium front panels and for engraving wide insulation gaps. Diameter: 0.8 mm, 1.0 mm, 2.0 mm, 3.0 mm