LPKF ProtoLaser S

Laser Structuring of Prototype PCBs
and Small Series

The LPKF ProtoLaser S laser system structures complete PCBs in minutes - with a layout area of approximately 229 x 305 x 10 mm (9" x 12" x 0.4"). The huge time savings mean that different layouts can be tested quickly and simply. Prototypes and small production batches can also be produced on short notice if required. The system requires no chemicals and is easy to operate.

The LPKF ProtoLaser S is even more precise than the mechanical systems and is therefore ideal for HF and microwave circuits, as well as digital and analog circuits. It produces precise geometries on a whole range of substrates such as copper-clad FR4, aluminum-coated PET films, ceramics, Duroid and PTFE.

Alignment for two-sided prototypes increases tremendously with the fiducial recognition camera. This camera allows the LPKF ProtoLaser S to visually inspect and properly align the workpiece.

For drilling through-holes in printed circuit boards, an LPKF ProtoMat is a perfect complement to a LPKF ProtoLaser S.

Technical Data

Technical Specifications: LPKF ProtoLaser S
Max. material size and layout area (X/Y/Z)	229 mm x 305 mm x 10 mm (9” x 12” x 0.4”)
Structuring speed	∅ 6 cm²/min ^a (∅ on laminated substrate)
Diameter of focused laser beam	25 μm (1 mil)
Minimum line/ space	50 μm/25 μm (2 mil /1 mil) ^a
Accuracy*	2 μm (0.08 mil)
Repeatability	± 2 μm (± 0.08 mil) ^b
Laser pulse frequency	15-200 kHz
Dimensions (W x H x D)	875 mm x 1,430 mm x 750 mm (34.4” x 56.3” x 29.5”) ^c
Weight	260 kg (573.2 lbs)
Operating conditions
Power supply	110/230 V, 50 – 60 Hz, 1.4 kW
Compressed air supply	8 bar (116 psi), 160 l/min (5.66 cfm)
Cooling	Air-cooled (internal cooling cycle)
Ambient temperature	22 °C ± 2 °C (71.6 °F ± 4 °F)
Exhaust
Power supply	230 V, 50/60 Hz, 1.2 kW
Air flow rate	320 m³/h, max. vacuum pressure 21,000 PA
Filter	Active carbon filter and HEPA filter
Dimensions (W x H x D)	365 mm x 740 mm x 501 mm (14.4” x 29.1” x 19.7”)
Weight	80 kg (176.4 lbs)
Required accessories	Exhaust, compressor, standard PC
Hardware and software requirements	Microsoft Windows 2000 or higher, 700 MHz or faster processor, min. 512 MB RAM (1 GB recommended), min. screen resolution 1024 x 768 pixels, USB 2.0

^a Depending on material and laser beam parameters
^b Direct repeat of laser beam movement
^c Height with open door 1,730 mm (68.1”)
* Resolution scanfield

_{Technical specifications subject to change.}

Brochures

View online
PCB Laser Structuring System