LPKF ProtoMat S63

A New Generation of
Advanced Circuit Board Plotters

The all-rounder in the new LPKF ProtoMat S series is great for virtually any job in in-house prototyping. The ProtoMat S63 masters 2.5-dimensional material machining and features a faster spindle speed of 60.000 rpm. This also makes it suitable for drilling test adapters and housing production.

Automatic tool change

Up to 15 tools are automatically changed during production. This reduces set-up times and allows for unattended production.

Automatic milling width adjustment

The conical milling cutters produce different insulation channels depending on the penetration depth. The automatic milling width adjustment maintains uniform PCB track widths.

Dispensing

The built-in dispenser applies solder paste onto the substrates fully automatically with minimum data preparation.

60.000 rpm spindle motor

The 60.000 rpm milling spindle ensures the shortest machining times and highest accuracy.

Upgradeable to ProtoMat S103

Upgrade kit includes 100.000 rpm spindle and pneumatic non-contact working depth limiter and vacuum table. Start upgrade animation.

Options & accessories

Pictures

Sample application: multilayer circuit boards

ProtoMat S63 while inserting a tool

ProtoMat S63 milling head in idle position

ProtoMat S63 during tool change

Upgrade kit to ProtoMat S103

Videos

Milling with the ProtoMat S63

Dispensing with the ProtoMat S63

Contour routing with the ProtoMat S63

ProtoMat S63 with automatic tool change bar

Technical Data

Technical Specifications: LPKF ProtoMat S63
Max. material size and layout area (X/Y/Z)	229 mm x 305 mm x 35/22 mm (9” x 12” x 1.4/ 0.9”)*
Resolution (X/Y)	0.5 μm (0.02 mil)
Repeatability	± 0.001 mm (± 0.04 mil)
Precision of front-to-back alignment	± 0.02 mm (± 0.8 mil)
Milling spindle	Max. 60,000 rpm, software controlled
Tool change	Automatic, 15 positions
Milling width adjustment	Automatic
Tool holder	3.175 mm (1/8”), automatic holder
Drilling speed	120 strokes/min
Travel speed (X/Y)	Max. 150 mm/ s (6”/s)
X/Y-drive	3-phase stepper motor
Z-drive	2-phase stepper motor
Dimensions (W x H x D)	670 mm x 540 mm x 840 mm (26.4” x 21.3” x 33”)
Weight	58 kg (128 lbs)
Operating conditions
Power supply	90 – 240 V, 50 – 60 Hz, 450 W
Compressed air supply (only for Dispensing)	6 bar (87 psi), 10 l/min (0.35 cfm)
Required accessories	Dust extraction