Products > Rapid PCB Prototyping > Circuit Board Plotters > ProtoMat E33
You are here: Products > Rapid PCB Prototyping > Circuit Board Plotters > ProtoMat E33
 

LPKF ProtoMat E33

For Machining Circuit Boards in Training and School

Description
Barely larger than a size A3 sheet of paper: the LPKF ProtoMat E33 is an economical and compact circuit board plotter for machining circuit boards without wet chemicals. This makes the system perfect for use in training or for limited budgets.

The LPKF ProtoMat E33 will structure single- or double-sided circuit boards, drilling holes for through-plating, cutting individual boards from the base material and can even engrave front plates for housings. The system is robust and intended for application areas where time is not particularly of the essence. And yet the LPKF ProtoMat E33 doesn’t need to shy away from having its structuring results compared to those of its big brothers.

Still the system is easy to use. The – included – software effectively supports users with the machining process.

Preview Movie


Manual tool holder

All common drilling and milling tools are quickly and easily ready for use.

33,000 rpm spindle speed

Like all ProtoMats each ProtoMat E33 is carefully calibrated at the LPKF factory. This ensures it will produce the finest structures in any common material. With a maximum travel speed of 60 mm per second (approx. 2”/s) and a spindle speed of 33,000 rpm the E33 is the perfect entry-level model for in-house prototyping.

Pictures
Milling head on the ProtoMat S43
In use:
ProtoMat E33 machining a circuit board

Videos

Preview Movie

Milling with the ProtoMat E33


Preview Movie

Drilling with the ProtoMat E33


Preview Movie

Contour routing with the ProtoMat E33


Technical Data
Technical Specifications: LPKF ProtoMat E33
Max. material size and layout area (X/Y/Z) 229 mm x 305 mm x 10 mm (9” x 12” x 0.4”)
Resolution (X/Y) 0.8 μm (0.04 mil)
Repeatability ± 0.005 mm (± 0.02 mil)
Precision of front-to-back alignment ± 0.02 mm (± 0.8 mil)
Milling spindle Max. 33,000 rpm, software controlled
Tool change Manual
Milling width adjustment Manual
Tool holder 3.175 mm (1/8”)
Drilling speed 100 holes/min
Travel speed (X/Y) Max. 50 mm/s (2”/s)
X/Y-drive 2-phase stepper motor
Z-drive 2-phase stepper motor
Dimensions (W x H x D) 370 mm x 300 mm x 450 mm (14.6” x 11.8” x 17.7”)
Weight 15 kg (33 lbs)
Operating conditions
Power supply 90 – 240 V, 50 – 60 Hz, 150 W
Required accessories Dust extraction

Technical specifications subject to change.

Brochure

More information



                                       
LPKF Laser & Electronics AG  •  Osteriede 7  •  30827 Garbsen  •  Germany  •  Tel.: +49 (0) 5131 7095-0  •  Fax: +49 (0) 5131 7095-90
© by LPKF

 
LPKF Group Sites
LPKF LaserWelding
LPKF SolarQuipment
LaserMicronics
ZelFlex Stretching Frames

LPKF Distributors
Europe (West)
Austria   
Belgium   
France   
Luxembourg   
Netherlands   
Switzerland   
Europe (East)
Czech Republic   
Hungary   
Poland   
Romania   
Russia   
Slovenia   
Ukraine   
Europe (North)
Danmark   
Estonia   
Finnland   
Ireland   
Latvia   
Lithuania   
Norway   
Sweden   
UK   
Europe (South)
Bosnia and Herzegovina   
Croatia   
Greece   
Italy   
Portugal   
Macedonia   
Montenegro   
Serbia   
Spain   
Turkey   
America
Argentina   
Brazil   
Canada   
Chile   
Colombia   
Mexico   
Peru   
USA   
Venezuela   
Asia
China   
Hong Kong   
India   
Indonesia   
Iran   
Israel   
Japan   
Jordan   
Korea   
Malaysia   
Pakistan   
Philippines   
Saudi Arabia   
Singapore   
Taiwan   
Vietnam   
Africa
Algeria   
Egypt   
Kenya   
Morocco   
Nigeria   
South Africa   
Tunesia   
Australia