Applications > LDS > Design rules > Fixtures, clamps and bonding seams
You are here: > > > Fixtures, clamps and bonding seams
Fixtures, clamps and bonding seams
The components have to be fixed in place during laser structuring and assembly. The fixing positions must not harm any sensitive parts such as tracks, contact pads or component seats. Tracks must not be laid over bonding seams of the thermoplastic part.
LPKF Laser & Electronics AG Osteriede 7 D-30827 Garbsen Germany Tel.: +49-(0)5131-7095-0 Fax: +49-(0)5131-7095-90
© by lpkf
